Train radio antenna.
Dual-polarised.
Omnidirectional.

DESIGNED FOR FUTURE REQUIREMENTS

This double-polarised, omnidirectional 2x2 MIMO mobile radio antenna for roof mounting has been specially developed for the special requirements of railway applications, including protection against high currents and voltages. It enables the simultaneous operation of two GSM-R radio modules without mutual interference. This frees up space on the roof for a special FRMCS antenna, which is required for the migration to FRMCS. Once the migration is complete, the FANT antenna will realise its full potential and support the entire regulated European FRMCS spectrum.

Enquire now

Highlights

2-port train radio roof antenna for mobile radio bands
Optionally available with built-in dual-band GNSS antenna (3-port) with integrated LNA
Enables 2x2 MIMO with true polarisation diversity for high data throughput
Average combined condition number on the supported mobile radio bands of less than 10 dB
Supports 2G/3G/4G/5G bands from 694 to 4200 MHz
Robust design complies with railway standard EN 50155
Fire hazard level according to EN 45545-2 and NFPA130
High-voltage and high-current protection for use under overhead lines
Suitable for installation in high-speed trains (up to 500 km/h)
Composite sealing discs for silicone-free sealing of the mounting screws

Technical data

Dimensions & weight

Height

90 mm

Width

508.7 mm

Depth

411.7 mm

Weight

approx. 6.5 kg (without packaging)

Material

Colour & material Radom

RAL 7043 (dark grey), polycarbonate

Colour & material base plate

Grey / aluminium

Climatic conditions

Temperature range Use, storage & transport

-55 to 85 °C

Degree of protection

IP69

Fire hazard level

DIN EN 45545-2 R24 HL3

Solar radiation

UL 746C, F1

Environmental audits according to

EN50155:2022-06

General data

High-voltage protection

EN50124-1 (3.8 kV DC /27.5 kV AC, 1min)

High current protection

UIC 533 (40 kA, 0.125 s)

Corrosion protection

Low-corrosion design in accordance with MIL-DTL-14072(E), 96-hour salt spray test

Assembly

must be installed lengthways to the wind/drive direction

Detailed tables on the (also optional) electrical configuration and internal connections can be found in the data sheet, which you can view and download below.

Enquire now

Product folder

magnifier