The control units MMIC of the MESA26 train radio family are designed for menu-guided control of digital and analogue train radio. They fulfil the requirements for use on rail vehicles and are designed for console installation in the driver's cab. With the aid of an intercom system consisting of a handset and loudspeaker, the train driver is able to carry out a wide range of communication tasks.
Funkwerk control panels are developed in accordance with specifications and European standards and are characterised by their innovative and intuitive user guidance. Functions that can be carried out without orientation on the display can be executed using hardkeys. All other functions are controlled via the softkeys. This makes operation easier for the user and also allows the flexibility of functional changes without the need for hardware.
Enquire nowThe design of the key symbols is based on DIN CLC/ TS 50459-5:2008-05; VDE V 0831-459-5:2008-05 Part 5. The extensive railway-specific functions are mainly controlled via the keypad with its 10 hard keys and 14 soft keys.
Hardkeys
Keys with fixed function assignment independent of the current menu level. The following functions are designed as hard keys:
Emergency call
Call to the dispatcher
Call to the train attendant
Train announcements
Call Lok - Lok
Up direction button
Down direction button
Confirmation of the selection made
Resetting the train radio system
Menu
All other operating functions are activated via softkeys.
Softkeys
The functional assignment of the softkeys is shown in the immediately adjacent area of the display and depends on the radio system set and the current menu level.
Consistent assignment of functions to the same softkeys in the menu levels and an optimised display size make it easy for the driver to perform all operating actions during the journey.
Construction method
Closed housing
Height
116 mm
Width
296 mm
Depth
81 mm
Weight
2.1 kg
EFFECTIVE VISIBLE AREA
171 x 61 mm
RESOLUTION
800 x 480 pixels
READING ANGLE AT 25 °C
Vertical: ±80°, horizontal: ±80° (for CR ≥ 10)
PROTECTION CLASS
Front side: IP54 according to DIN EN 60529
Rear side: IP44 according to DIN EN 60529
VIBRATIONS AND SHOCKS
according to DIN EN 50155
EMC
in accordance with DIN EN 50121-3-2 and DIN EN 50155
OPERATING TEMPERATURE RANGE
-25 °C to +70 °C
STORAGE TEMPERATURE RANGE
-40 °C to +70 °C (in original packaging)
MAXIMUM GRADIENT
± 1 °C/min Ambient temperature
MAXIMUM HUMIDITY
75 % annual average
RELATIVE HUMIDITY
according to DIN EN 50155
ALTITUDE AND PRESSURE FLUCTUATIONS
-100 m to 1800 m above sea level
X1: CENTRAL UNIT / CR26
25-pin D-Sub
X2: HANDSET
9-pin D-Sub
X3: LOUDSPEAKER
9-pin D-Sub
X4: DIGITAL INPUTS AND OUTPUTS
9-pin D-Sub
X5: RS422 (DATA APPLICATION/IFS)
15-pin HD-D-Sub
OTHER
Brightness sensor, protective conductor
RATED INPUT VOLTAGE
24 / 48 VDC (on-board power supply)
